contact us

Warehouses

 

Typically the types of plant that you might expect to find at engineering workshops would be covered under LOLER, PUWER, PSSR and COSHH Regulations.
 
You would expect to find a compressed air system with pressure vessels/air receivers. If there is one pressure vessel in the system above 250 Bar/Litres then the system is required to be assessed and a Written Scheme of Examination produced to comply with the Pressure Systems Safety Regulations 2000 and Statutory Certification produced in line with the Written Scheme. Refrigeration Plant.
Hot Water Heating/Supply Systems if under 100⁰C operating pressure will be exempt from the PSSR and are non-statutory but are required to be inspected annually.

Under LOLER typical types of plant that could be found on site would be Fork Lift Trucks, Order Pickers, Pallet Trucks, Miscellaneous Lifting Tackle such as Polyester Belt Slings, Chain Slings, etc.

There may be a Passenger Lifts in the offices that is required to be inspected 6 monthly due to carrying persons, or a Goods Lift in the factory that carries goods only and is required to be inspected 12 monthly.

PUWER covers any work equipment that is provided for use at work. Examples are Pumps, Motors, start/stop buttons, hand held tools and equipment, roller shutter doors.

Electrical Testing and Inspection covers Electrical Installations e.g. Fixed Wiring and Portable Appliances

Request A Call back

Please enter your name and phone number

Nationwide Service

nationwide service - workplace inspectionsCall our Office
Weekdays 9 am – 5 pm
Tel: 01443 230003
Fax: 01443 237789

Scroll Up